HDPE Liner is a continuous flexible geomembrane material made of one or more polymer synthetic materials. It mainly plays the role of anti-seepage and isolation. The more common one is high-density polyethylene (HDPE) geomembrane. HDPE Liner has impermeability, durability, chemical corrosion resistance, excellent welding construction performance, and high cost performance, so it has been widely used in various anti-seepage, isolation and other projects.
With industry-leading strength and superiority over traditional materials in Philippines, geomembrane HDPE liner manufacturers Philippines have become increasingly sought by a variety of sectors around the world. To meet this demand, the top 7 HDPE Liner manufacturers and suppliers have emerged as significant players in this steadily growing Philippines market. Companies such as Solmax International supply some of the most reliable geomembranes available on the market today. BPM Geosynthetics brings years of experience to the table and provides unmatched durability and cost-effectiveness with its products. These two companies are just a few examples among an array of exemplary providers that make up the list of leading geomembrane producers in the world. If you seek quality products at competitive prices, then turning to these top 7 HDPE Liner manufacturers Philippines is sure to give you exactly what you need.
1. Top 7 HDPE Liner Manufacturers Philippines
1.1 SOLMAX
The Canadian Soma Group was established in Quebec, Canada in 1981. In 2009, it set up a factory in Malaysia to produce HDPE/LLDPE geomembranes. In 2017, a company was established in Houston, USA to enter the waste management and control business in the field of oil and gas extraction. At the end of 2017, Soma Group acquired the geosynthetic material brand GSE. In 2018, Solmax changed to “Solmax becomes Solmax-GSE”, and in 2019 the group announced that it would be known as Solmax in all regions where it operates (The company announces it will be known as Solmax in all the territories in which it operates). In 2021, Soma Group once again joined hands with the world-renowned geotechnical materials manufacturer Royal Ten-Cate Group (Ten-Cate Group) of the Netherlands to further strengthen its market position in the field of geosynthetic materials.
Canada’s SOLMAX Group has factories in North America, Europe, the Middle East, Africa and Asia (Malaysia, Thailand, Suzhou, China) with an annual production capacity of 250,000 tons. The global production and supply chain system can provide customers with better, faster and more effective after-sales service guarantees.
The series of geomembranes produced by Soma include standard HDPE HDPE Linerseries (meeting or exceeding GRI-GM13 standards), standard LLDPE HDPE Linerseries (meeting or exceeding GRI-GM17 standards), and colored HDPE Linerseries (black, white, green, tan, etc.). High-performance HDPE Linerseries, conductive HDPE Linerseries, high-temperature-resistant HDPE Linerseries, concrete nail-embedded membrane series, flexible vertical anti-seepage system, concrete connection locks, extruded welding rods and other auxiliary products that far exceed the GRI-GM13 and GRI-GM17 standards.
1.2 BPM Geosynthetics
Since its establishment in 2007, as the leading HDPE Liner manufacturers and suppliers, BPM Geosynthetics has been committed to providing global customers with one-stop services in the research and development, production, sales and export of geosynthetic materials. BPM Geosynthetics has 120 senior technical talents specializing in geotechnical materials. The manufacturing plant covers an area of more than 16,000 square meters and is equipped with industry-leading automated production equipment and professional testing instruments. Product innovation, quality assurance, and customer satisfaction have always been Tai’an Jialutong’s commitment to its partners. BPM Geomembrane products include smooth geomembranes, rough geomembranes, composite geomembranes, geotextiles, bentonite waterproof blankets, geogrids, drainage boards, etc.
BPM Geosynthetics brand products have passed IS09001 quality management system, IS014001 environmental management system, OHSAS18001 occupational health system certification, and passed GAILAP laboratory testing, Soncap.SASO, BV, SGS and other certifications and Intertek testing. Tai’an Jialutong geomaterial products are widely used in aquaculture, landfills, biogas digesters, sewage treatment, drainage systems, municipal engineering, mining, garden landscaping, etc. We are willing to become your partner with cost-effective and innovative HDPE Linerand geomaterial series products, excellent quality and perfect after-sales service.
1.3 HUITEX
Located in Tainan, Taiwan, HUITEX has built a reputation for reliability by providing consistent quality products to customers around the world since the 1990s. HUITEX is a member of the International Geosynthetics Society (IGS) and the International Association of Geosynthetic Installers (IAGI).
HUITEX has passed ISO 9001 and 14001 certification, and has 3 blown film production lines to produce HDPE/LLDPE smooth and rough geomembranes. It can manufacture high-quality geomembranes, geocells, and concrete protective liners for major geotechnical engineering applications such as landfills, wastewater treatment, tunnels, waterproofing, mining projects, and slope protection. Among them, HUITEX reinforced HDPE geomembranes are specially designed for severe Developed for harsh application environments, it is designed to separate contaminated wastewater such as coal bed methane wastewater from the surrounding countryside and underlying aquifers.
1.4 SOTRAFA
SOTRAFA is part of the Armando Alvarez Group established in 1964. It has been producing and supplying geomembranes since 2005. Its products are mainly used in four fields: mining, water conservancy, environmental engineering and civil engineering. Alvatech® HDPE Linerproducts are sold well in more than 60 countries around the world. Its business offices are located in core markets around the world. Since 2005, it has produced and supplied more than 100 million square meters of geomembrane.
SOTRAFA uses high-quality raw materials to ensure good product performance. SOTRAFA uses an advanced cast extrusion process (calendering system) to ensure uniform thickness and surface finish. SOTRAFA’s rough HDPE Linermade of high-density polyethylene (HDPE) or linear low-density polyethylene (LLDPE) can be stably installed on steep slopes (high friction coefficient, high friction angle). SOTRAFA was the only company in the world that could The manufacturer that provides 7.5m wide rolled rough surface HDPE Linereffectively reduces the number of welding seams, thereby reducing installation costs and improving project quality.
The friction angle between Alvatech® rough mask and geotextile is greater than 35°, and the friction angle with geocomposite drainage net products is greater than 30°. In addition, the company has a multi-purpose HDPE Linerseries including: Alvatech® two-color membrane, Alvatech® HP-OIT aging resistant geomembrane, Alvatech® HTR high temperature resistant geomembrane, Alvatech® multi-color geomembrane, Alvatech® thermal energy membrane, EVOH ethylene copolymer waterproof membrane, Alvatech® conductive membran.
1.5 GEOSINCERE
Shandong GEOSINO New Material Co.,Ltd was established in 2007. Geosincere began to produce a series of HDPE Linerproducts when the factory was established, with an annual production capacity of 24,000 tons. Using advanced blown film production equipment, the HDPE Linerproduct thickness control is ±5%; the size control is ±1%. The width is 8m, and the thickness is from 0.5mm to 3.0mm. It can produce HDPE geomembrane, LLDP geomembrane, two-color and colored geomembrane, conductive HDPE Linerand other series of products, with performance better than GRI-GM13 and GRI-GM17 international standards.
Geosincere geomembrane specializes in the production of geomembranes and membrane materials, and its advanced laboratories ensure strict manufacturing quality. The company has experienced sales and marketing teams to provide technical support and after-sales service.
1.6 MACCAFERRI
MACCAFERRI, a company headquartered in Italy, has a history of more than 140 years. As a global company, Maccaferri has more than 70 subsidiaries around the world, offices in more than 100 countries and more than 3,000 employees.
MACCAFERRI does not simply sell products, but strives to provide leading technical solutions for the design and promotion of challenging projects. The company is firmly committed to providing better technical and engineering solutions through focus, communication, innovation and collaboration.
MACCAFERRI provides different types of geotechnical materials. As early as the 19th century, MACCAFERRI invented the “Gabion” (gabion mesh). The HDPE Linerproduced by MACCAFERRI is under the brand name MacLine®. MacLine® SDH is a double-gloss HDPE geomembrane; MacLine® MH & RDH is a high-density rough surface geomembrane. Macline RDH is a double-rough surface and RMH is a single-rough surface. Its performance is similar to standard smooth products. In addition, MacLine® W is an HDPE reinforced geomembrane, which is made of high-density polyethylene filament woven geotextile as the core layer and covered with polyethylene films on both sides. It has extremely high mechanical strength.
1.7 ATARFIL
ATARFIL was founded in 1995 and is headquartered in Granada, Spain. ATARFIL uses independently developed advanced flat extrusion technology to produce various types of high-performance geomembranes. The product series includes high-density polyethylene HDPE, linear low-density polyethylene LLDPE, ultra-low-density polyethylene VLDPE and polypropylene PP, which are professionally used in various applications. An anti-seepage system.
ATARFIL has production plants in Europe (Granada, Spain), the Middle East (Dubai, United Arab Emirates) and the Americas (Virginia, United States), as well as sales offices and business operations in Spain, United Arab Emirates, United States, Mexico, Turkey, India, South Africa and Australia center. Activities span five continents, with customers in more than 50 countries. In recent years, the use of Atafee HDPE Linerin various anti-seepage projects has been significantly increasing in China.
ATARFIL’s factories on three continents around the world are equipped with multiple advanced cast extrusion production lines, all equipped with online thickness control systems, and the thickness tolerance can be controlled within ±3%. ATARFIL HDPE Linerhas an environmental stress cracking resistance time of more than 3,000 hours. It is especially suitable for application fields such as tailings and hazardous waste landfills with harsh environments and high requirements for chemical corrosion resistance. In order to ensure quality traceability and facilitate construction, ATARFIL continuously prints the brand specifications, roll number and length ruler on the edge of each roll of HDPE Linerproduced. This way, the roll length can be confirmed, and the source of the product can still be traced by the roll number after the packaging is damaged.
2 Summary
Choosing the right HDPE liner manufacturers is crucial to ensure the quality and effectiveness of the HDPE geomembrane liner for your specific application. HDPE liner quality, HDPE liner manufacturers reputation, installation service, cost, delivery time are the important considerations to choose the right HDPE liner manufacturers Philippines. Although there are many excellent HDPE Liner manufacturers Philippines, more and more customers choose to import BPM Geosynthetics’ geomembranes from China.
BPM Geomembrane owns state-of-the-art manufacturing factory is located in Taian City, the famous tourist city near the expressway from Beijing to Shanghai, Shandong Province, China. In recent years, we had invested more than 2,000,000 dollars to improve the basic production facilities, working conditions, employee salary and welfare, technical and teamwork training, etc. Most of our products had been kept up with the international forefront counterparts, some of them have enjoyed leading position, especially smooth HPDE geomembrane liner. We also can manufacture according to your special requirements, ODM, OEM, customization are also available.
Welcome to contact us.
